185 (the startup sequence is not valid. suspect that power was off when the startup sequence was being updated.) (系统启动顺序无效,怀疑是更新启动顺序时电源关掉) | 1. reset the startup sequence in easy-setup. (在easy-setup 重设启动顺序) |
186 | 1. system board. (检查主板) |
190 (a depleted battery pack was installed when the power was on.) (开机时,机内笔记本电池已快耗尽了)
| 1. go to checking the battery pack. (更换机内笔记本电池) |
191xx (pm initialization error.) (pm 初始化错误) | 1. system board. (检查主板) |
192 (fan error.) (cpu 散热风扇故障) | 1. measure the voltage of the backup battery. if the voltage is not correct, replace the backup battery. (检查cmos 备份电池的电压,电压不行时更换电池) 2. fan (要更换cpu风扇) 3. system board (主板问题) |
195 (the configuration read from the hibernation area does not match the actual configuration.) (从休眠区域读到的系统配置信息与实际配置不同) | 1. check if the configuration was changed. for example, check if the dimm card is added. (检查配置是否改动,内存有无增加等) |
196 (a read error occurred in the hibernation area of the hard disk drive.) ( 从硬盘的休眠区域中读写时,发生错误) | 1. run the hard disk drive test. (测试硬盘) 2. hard disk drive.(检查硬盘) |
199xx (resume error.)
| 1. system board. |
1xx | 1. system board. |
2xx (内存问题) 201: memory data error. 202: memory line error 00-15. 203: memory line error 16-23. 205: memory test failure on on-board memory. 221: rom to ram remap error. | 1. go to memory checkout. 2. dimm card. 3. system board. |
225 (unsupported memory module.) | 1. check if the supported dimm is installed. 2. dimm card. 3. system board. |
301, 303, 304, 305, 3xx (301: keyboard error.) (笔记本键盘故障,301这个故障经常出现,往往是笔记本刚开机时,不小心按住键盘所造成的,一般只要重启电脑即可;) | 1. go to keyboard or auxiliary input device checkout 2. keyboard. 3. external numeric keypad. 4. external keyboard. 5. keyboard/mouse cable. 6. system board. |
601, 6xx (601: diskette drive or controller error.) (软驱或软驱控制器故障)
| 1. go to diskette drive checkout. 2. diskette drive assembly. (软驱有没有装配好?) 3. diskette. 4. system board. (检查主板) |
602 (diskette read error.); (软驱读故障) | 1. go to diskette drive checkout 2. diskette. 3. diskette drive assembly.(软驱有没有装配好?) |
604 (unacceptable id was read from the diskette drive.); | 1. go to diskette drive checkout 2. diskette drive assembly. 3. system board. |
2402 | 1. tv out card |
24xx (2401: system board video error.) ;(主板显示部分有问题) | 1. system board. (检查主板相关部分) |
808x 8081: pcmcia presence test failure. (pcmcia revision number also checked.) 8082: pcmcia register test failure. | 1. pc card slot assembly. 2. pcmcia device. 3. system board. |
860x (pointing device error when trackpoint is disabled.) (当指点杆禁用时,外接的指点设备有故障); 8601: system bus error-8042 mouse interface. 8602: external mouse error.(外接鼠标故障); 8603: system bus error or mouse error. (总线或鼠标故障); | 1. external mouse. (检查外接鼠标); 2. external keyboard. (检查外接键盘); 3. system board.(检查主板); |
861x (pointing device error when trackpoint is enabled.) (当指点杆启用时,外接的指点设备有故障); 8611: system bus error-i/f between 8042 and ipdc. 8612: trackpoint error. 8613: system board or trackpoint error. | 1. reseat the keyboard cable on the sub card. (把键盘连接主板的线,重插拔一下); 2. keyboard (检查键盘); 3. external mouse (检查外接鼠标); 4. sub card (主板上连接键盘的子卡); 5. system board (主板); |
i9990301 i9990302 i9990305 i9990301: hard disk error. (硬盘有故障); i9990302: invalid hard disk boot record. (无效的硬盘引导纪录); i9990305: no bootable device. (无可用的启动引导设备); | 1. check that the operating system is installed in the hard disk drive. if not, install the operating system. (检查硬盘上有否安装操作系统); 2. reseat the boot device.(重新设置可启动的设备); 3. check the startup sequence for the correct boot device. (检查启动顺序是否跟设备正确对应); 4. check that the operating system has no failure and is installed correctly.(检查电脑的操作系统是否安装正确); |
i9990303 (bank-2 flash rom check sum error.)
| 1. system board. |
other codes not listed above. | 1. go to undetermined problems |
关于我们