NERO 刻录问题

windflower

123
123
1A21-0009-9030-2324-9230-0680

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'd:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 2004-7-29 8:51:12
Nero版本： 6.6.0.1
刻录机：              <HL-DT-ST RW/DVD GCC-4242N>版本: 0201 - HA 1 TA 0 - 6.6.0.1
适配卡驱动程序：     <atapi>                   HA 1
Drive buffer  :      2048kB
Bus Type      :      default (0) -> ATAPI, detected: ATAPI
CD-ROM:               <HL-DT-ST RW/DVD GCC-4242N>版本: 0201 - HA 1 TA 0 - 6.6.0.1
适配卡驱动程序：     <atapi>                   HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : FUJITSU MHT2040AH                atapi Port 0 ID 0  DMA: On
CdRomPeripheral      : HL-DT-ST RW/DVD GCC-4242N        atapi Port 1 ID 0  DMA: On
CdRomPeripheral      : Generic DVD-ROM         1.0    d347prt Port 2 ID 0  DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST RW/DVD GCC-4242   G:   CDRom0
Generic DVD-ROM            F:   CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 766MB (785328kB)
Free physical memory: 276MB (283084kB)
Memory in use       : 63 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

18.5.2006
CD-ROM (ISO)
9:09:38        #1 Text 0 File Isodoc.cpp, Line 6165
        Iso document burn settings
        ------------------------------------------
        Determine maximum speed : FALSE
        Simulate                : FALSE
        Write                   : TRUE
        Finalize CD             : FALSE
        Multisession            : TRUE
        Multisession type:      : Start multisession
        Burning mode            : TAO
        Mode                    : 1
        ISO Level               : 1 (Max. of 11 = 8 + 3 char)
        Character set           : ISO 9660
        Joliet                  : TRUE
        Allow pathdepth more than 8 directories : TRUE
        Allow more than 255 characters in path  : TRUE
        Write ISO9660 ;1 file extensions        : TRUE
       
9:09:38        #2 Text 0 File Burncd.cpp, Line 2832
        HL-DT-ST RW/DVD GCC-4242N
        防烧坏保护已激活
       
9:09:38        #3 Text 0 File Reader.cpp, Line 127
        Reader running
       
9:09:38        #4 Text 0 File Writer.cpp, Line 122
        Writer HL-DT-ST RW/DVD GCC-4242N running
       
9:09:38        #5 ISO9660GEN -11 File geniso.cpp, Line 3286
        First writeable address = 0 (0x00000000)
       
9:09:38        #6 Text 0 File Burncd.cpp, Line 3117
        Turn on 轨道一次刻录, using CD-R/RW media
       
9:09:38        #7 Text 0 File DlgWaitCD.cpp, Line 256
        Last possible write address on media:   359848 ( 79:59.73)
        Last address to be written:             331063 ( 73:36.13)
       
9:09:38        #8 Text 0 File DlgWaitCD.cpp, Line 268
        Write in overburning mode: NO (enabled: CD)
       
9:09:38        #9 Text 0 File DlgWaitCD.cpp, Line 2309
        Recorder: HL-DT-ST RW/DVD GCC-4242N;
           CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd.
           ATIP Data:
             Special    Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74)
             Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
       
9:09:38        #10 Text 0 File DlgWaitCD.cpp, Line 430
        >>> Protocol of DlgWaitCD activities: <<<
        =========================================
       
9:09:38        #11 Text 0 File ThreadedTransferInterface.cpp, Line 844
        Setup items (after recorder preparation)
         0: TRM_DATA_MODE1 ()
            2 indices, index0 (150) not provided
            original disc pos #0 + 331064 (331064) = #331064/73:34.14
            relocatable, disc pos for caching/writing not required/ required, no patch infos
            -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 331062 blocks [HL-DT-ST RW/DVD GCC-4242N]
        --------------------------------------------------------------
       
9:09:38        #12 Text 0 File ThreadedTransferInterface.cpp, Line 1047
        Prepare recorder [HL-DT-ST RW/DVD GCC-4242N] for write in TAO
        DAO infos:
        ==========
         MCN: ""
         TOCType: 0x00; Session Closed, disc not fixated
         Tracks 1 to 1:
           1: TRM_DATA_MODE1, 2048/0x00, FilePos             0        307200     678326272, ISRC ""
        DAO layout:
        ===========
         __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
            -150 |  lead-in |   0 |   0x00 |  0x41
            -150 |        1 |   0 |   0x00 |  0x41
               0 |        1 |   1 |   0x00 |  0x41
          331064 | lead-out |   1 |   0x00 |  0x41
       
9:09:38        #13 Text 0 File ThreadedTransferInterface.cpp, Line 1096
        Removed 2 run-out blocks from end of track 1. Length: 331064 -> 331062.
       
9:09:38        #14 Phase 24 File dlgbrnst.cpp, Line 1853
        文件暂存过程开始
       
9:09:38        #15 Text 0 File Burncd.cpp, Line 4003
        Cache writing successful.
       
9:09:38        #16 Phase 25 File dlgbrnst.cpp, Line 1853
        文件暂存过程完成
       
9:09:38        #17 Phase 36 File dlgbrnst.cpp, Line 1853
        以24x (3,600 KB/s)的速度开始刻录
       
9:09:38        #18 Text 0 File ThreadedTransferInterface.cpp, Line 2497
        Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
       
9:09:38        #19 Text 0 File Mmc.cpp, Line 20673
        Set BUFE: Buffer underrun protection -> ON
       
9:09:57        #20 SCSI -1135 File Cdrdrv.cpp, Line 1432
        SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04310000
        Status:     0x04 (0x01, SCSI_ERR)
        HA-Status   0x00 (0x00, OK)
        TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
        Sense Key:  0x03 (KEY_MEDIUM_ERROR)
        Sense Code: 0x0C
        Sense Qual: 0x00
        CDB Data:   0x2A 0x00 0x00 0x00 0x02 0x00 0x00 0x00 0x20 0x00 0x00 0x00
        Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
                    0x00 0x00 0x00 0x00 0x0C 0x00
       
9:09:57        #21 CDR -1135 File Writer.cpp, Line 311
        写错误
       
9:09:57        #22 Text 0 File ThreadedTransfer.cpp, Line 229
        all writers idle, stopping conversion
       
9:09:57        #23 Text 0 File ThreadedTransfer.cpp, Line 223
        conversion idle, stopping reader
       
9:09:57        #24 CDR -201 File WriterStatus.cpp, Line 200
        写入状态无效
        HL-DT-ST RW/DVD GCC-4242N\H1 T0
       
9:09:57        #25 TRANSFER -18 File WriterStatus.cpp, Line 200
        无法执行结束轨道
       
9:09:57        #26 Text 0 File Mmc.cpp, Line 15477
        <HL-DT-STRW/DVD GCC-4242N> start Close Session
       
9:09:57        #27 Text 0 File dlgbrnst.cpp, Line 1711
        Set remaining time: 0:00,000 (0ms) -> OK
       
9:09:57        #28 Phase 38 File dlgbrnst.cpp, Line 1853
        以24x (3,600 KB/s)的速度刻录失败
       

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 2001-8-18 6:07:32
File 'Drivers\PXHELP20.SYS': Ver=2.03.22a, size=20576 bytes, created 2004-12-8 21:03:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 2004-8-4 14:59:44 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

大笨狮

看着头有点晕~~~~~~~~~

windflower

我试过不同的盘也没解决，关键是一下内容的中文：

9:09:57        #21 CDR -1135 File Writer.cpp, Line 311
        写错误
        
9:09:57        #22 Text 0 File ThreadedTransfer.cpp, Line 229
        all writers idle, stopping conversion
        
9:09:57        #23 Text 0 File ThreadedTransfer.cpp, Line 223
        conversion idle, stopping reader
        
9:09:57        #24 CDR -201 File WriterStatus.cpp, Line 200
        写入状态无效
        HL-DT-ST RW/DVD GCC-4242N\H1 T0
        
9:09:57        #25 TRANSFER -18 File WriterStatus.cpp, Line 200
        无法执行结束轨道
        
9:09:57        #26 Text 0 File Mmc.cpp, Line 15477
        <HL-DT-STRW/DVD GCC-4242N> start Close Session
        
9:09:57        #27 Text 0 File dlgbrnst.cpp, Line 1711
        Set remaining time: 0:00,000 (0ms) -> OK
        
9:09:57        #28 Phase 38 File dlgbrnst.cpp, Line 1853
        以24x (3,600 KB/s)的速度刻录失败

EddieFan

次次失败还是偶尔失败,从起机器后试一次,不要刻盘的时候再运行别的程序

funtionvon

CinChine
CinChine Software
5C80001080100000000762916627

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004-11-2 12:54:32

NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2
(Nero Express)
Recorder:             <MATSHITA DVD-RAM UJ-822S>Version: 1.61 - HA 1 TA 0 - 7.0.1.2
Adapter driver:      <IDE>                     HA 1
Drive buffer  :      2048kB
Bus Type      :      default (0) -> ATAPI, detected: ?
CD-ROM:               <Generic  DVD-ROM         >Version: 1.0  - HA 1 TA 1 - 7.0.1.2
Adapter driver:      <SCSI>                    HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : FUJITSU MHV2080AH                atapi Port 0 ID 0  DMA: On
CdRomPeripheral      : MATSHITA DVD-RAM UJ-822S         atapi Port 1 ID 0  DMA: On
CdRomPeripheral      : Generic DVD-ROM         1.0    d347prt Port 2 ID 0  DMA: Off

=== CDRom-Device-Map ===
MATSHITA DVD-RAM UJ-822S   F:   CDRom0
Generic DVD-ROM            K:   CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 510MB (522672kB)
Free physical memory: 73MB (74800kB)
Memory in use       : 85 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.5.2006
ISO编辑
19:53:09        #1 Text 0 File Isodoc.cpp, Line 6411
        Iso document burn settings
        ------------------------------------------
        Determine maximum speed : FALSE
        Simulate                : FALSE
        Write                   : TRUE
        Finalize CD             : FALSE
        Multisession            : TRUE
        Multisession type:      : Start multisession
        Burning mode            : DAO
        Mode                    : 1
        ISO Level               : 1 (Max. of 11 = 8 + 3 char)
        Character set           : ISO 9660
        Joliet                  : TRUE
        Allow pathdepth more than 8 directories : TRUE
        Allow more than 255 characters in path  : TRUE
        Write ISO9660 ;1 file extensions        : TRUE
       
19:53:09        #2 Text 0 File ThreadedTransfer.cpp, Line 525
        ReadBuffer-Pipe got 72704KB of Memory
       
19:53:09        #3 Text 0 File Reader.cpp, Line 124
        Reader running
       
19:53:09        #4 Text 0 File Writer.cpp, Line 113
        Writer F: MATSHITA DVD-RAM UJ-822S running
       
19:53:09        #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
        First writeable address = 0 (0x00000000)
       
19:53:09        #6 Text 0 File Burncd.cpp, Line 3302
        Turn on Disc-At-Once, using DVD media
       
19:53:09        #7 Text 0 File DlgWaitCD.cpp, Line 279
        Last possible write address on media:  2298495 (510:46.45, 4489MB)
        Last address to be written:            2293967 (509:46.17, 4480MB)
       
19:53:09        #8 Text 0 File DlgWaitCD.cpp, Line 291
        Write in overburning mode: NO (enabled: CD)
       
19:53:09        #9 Text 0 File DlgWaitCD.cpp, Line 2578
        Recorder: MATSHITA DVD-RAM UJ-822S, Media type: DVD-R
         Disc Manufacturer: LGE08 -
         Disc Application Code: 64, Disc Physical Code: 193
       
19:53:09        #10 Text 0 File DlgWaitCD.cpp, Line 458
        >>> Protocol of DlgWaitCD activities: <<<
        =========================================
       
19:53:09        #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
        Setup items (after recorder preparation)
         0: TRM_DATA_MODE1 ()
            2 indices, index0 (150) not provided
            original disc pos #0 + 2293968 (2293968) = #2293968/509:46.18
            relocatable, disc pos for caching/writing not required/ required, no patch infos
            -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2293968 blocks [F: MATSHITA DVD-RAM UJ-822S]
        --------------------------------------------------------------
       
19:53:09        #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
        Prepare recorder [F: MATSHITA DVD-RAM UJ-822S] for write in CUE-sheet-DAO
        DAO infos:
        ==========
         MCN: ""
         TOCType: 0x00; Session Closed, disc not fixated
         Tracks 1 to 1:
           1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4698046464, ISRC ""
        DAO layout:
        ===========
         __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
               0 |  lead-in |   0 |    0x41 | 0x00
               0 |        1 |   0 |    0x41 | 0x00
               0 |        1 |   1 |    0x41 | 0x00
         2293968 | lead-out |   1 |    0x41 | 0x00
       
19:53:09        #13 Text 0 File SCSIPassThrough.cpp, Line 36
        SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
       
19:53:09        #14 Phase 24 File dlgbrnst.cpp, Line 1725
        Caching of files started
       
19:53:09        #15 Text 0 File Burncd.cpp, Line 4132
        Cache writing successful.
       
19:53:09        #16 Phase 25 File dlgbrnst.cpp, Line 1725
        Caching of files completed
       
19:53:09        #17 Phase 36 File dlgbrnst.cpp, Line 1725
        Burn process started at 2x (2,770 KB/s)
       
19:53:09        #18 Text 0 File ThreadedTransferInterface.cpp, Line 2685
        Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
       
19:53:09        #19 Text 0 File DVDR.cpp, Line 2580
        Recording mode: Sequential Recording Mode for Multisession
       
19:53:09        #20 Text 0 File MMC.cpp, Line 21611
        Set BUFE: Buffer underrun protection -> ON
       
19:53:09        #21 Text 0 File DVDR.cpp, Line 2735
        Start write address at LBA 0
        DVD high compatibility mode: Yes
       
19:53:09        #22 Text 0 File Cdrdrv.cpp, Line 8411
        ---- DVD Structure: Physical Format Information (00h) ----
        Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
         Book Type: DVD-R   (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
         Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
         Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
         Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
         Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
         End Physical Sector Number of Data Area:      30000 h
         End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
         Data in Burst Cutting Area (BCA) does not exist
          Start sector number of the current Border-Out: 0 h
          Start sector number of the next Border-In:     0 h
         Media Specific [16..63]:
              00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
              00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
              00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
       
20:06:02        #23 SPTI -1039 File SCSIPassThrough.cpp, Line 323
        F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1039)
        Sense Key:  0x04 (KEY_HARDWARE_ERROR)
        Sense Code: 0x09
        Sense Qual: 0x01
        CDB Data:   0x2A 00 00 0E 05 C0 00 00 20 00 00 00
        Sense Area: 0xF1 00 04 00 0E 02 B0 0A 00 31 81 01 09 01
        Buffer x07260000: Len x10000
        0x2C 6E 08 38 04 80 E9 34 1F BE 48 11 E0 20 29 8C
        0xDC 82 96 44 61 BE B5 AD C2 DA A6 60 85 82 13 39
        0x05 6F 82 82 48 7B 48 20 A1 76 B3 A0 DD 99 31 6E
       
20:06:02        #24 CDR -1039 File Writer.cpp, Line 302
        Focus or tracking error
        F: MATSHITA DVD-RAM UJ-822S
       
20:06:02        #25 Text 0 File ThreadedTransfer.cpp, Line 228
        all writers idle, stopping conversion
       
20:06:03        #26 Text 0 File ThreadedTransfer.cpp, Line 222
        conversion idle, stopping reader
       
20:06:03        #27 Text 0 File DVDR.cpp, Line 2978
        EndDAO: Last written address was 918975
       
20:06:03        #28 Phase 133 File dlgbrnst.cpp, Line 1725
        Writing short lead-out
       
20:06:30        #29 SPTI -1 File SCSIPassThrough.cpp, Line 323
        F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
        Sense Key:  0x04 (KEY_HARDWARE_ERROR)
        Sense Code: 0x03
        Sense Qual: 0x01
        CDB Data:   0x00 00 00 00 00 00 00 00 00 00 00 00
        Sense Area: 0x71 00 04 00 00 00 00 0A 00 32 00 12 03 01
       
20:06:30        #30 SPTI -1176 File SCSIPassThrough.cpp, Line 323
        F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
        Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
        Sense Code: 0x72
        Sense Qual: 0x03
        CDB Data:   0x5B 01 02 00 00 03 00 00 00 00 00 00
        Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 03
       
20:06:30        #31 CDR -1 File WriterStatus.cpp, Line 167
        Unspecified Recorder Error
        F: MATSHITA DVD-RAM UJ-822S
       
20:06:30        #32 TRANSFER -24 File WriterStatus.cpp, Line 167
        Could not perform end of Disc-at-once
       
20:06:30        #33 Phase 38 File dlgbrnst.cpp, Line 1725
        Burn process failed at 2x (2,770 KB/s)
       

Existing drivers:
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 2004-8-7 8:00:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

lovegl

把你用NERO刻录时候的具体设置截图发上来吧，这些偶是看不出什么来

lovegl

Could not perform end of Disc-at-once

好像是说不能光盘一次刻录，不能封盘

funtionvon

原帖由 lovegl 于 2006-5-24 00:38 发表
Could not perform end of Disc-at-once

好像是说不能光盘一次刻录，不能封盘

我刻录失败也是类似的提示！

lovegl

原帖由 funtionvon 于 2006-5-24 23:31 发表



我刻录失败也是类似的提示！

那刻录的时候就选择轨道一次刻录(TAO)看看了

另刻录最好不要选择多重区段，一次刻满，也不要太满

windflower

我重起机器试过，也换过光盘试过，也是用IBM英文系统自带的刻录软件试过，也更改过刻录速度试过，都出现一样的问题，很担心是不是刻录机坏了